These LED strips are just about the best way to get tons of colorful LED light with a minimum of wiring and fuss! Each strip is 50cm in length and contains 15 light elements. Each element contains a red, green, and blue LED, as well as a tiny WS2812 controller chip. This means that each element is individually addressable and can accept brightness values of 0-255 for each of its LEDs, giving you 24 bits of color precision overall. Each LED is activated by using a special serial data protocol. This protocol allows many LEDs to be daisy chained together so that one microcontroller can control the whole lot – with a single data signal. Any number of these LEDs can be chained together by connecting one module’s data-out (DO) pin to another’s data-in (DI) pin.
Strip of 15 pieces/50cm of 5050 Red, Green, Blue (RGB) LEDs.
Each LED element is individually addressable with 24-bit color (8 bits each for R, G & B), 16 million colors.
3-Wires easy connection, 2-power supply lines and 1 data line.
Strip Length: 50cm.
Strip Width: 10mm.
Strip Thickness: 0.5mm Flexible PCB with back adhesive tape.
Interface: Serial (Shift Register).
Data Speed: 800Kbps.
Power Supply: 5V.
Connector: Male Conector at the Din end and female connector at Dout end for easy piggy back for longer strip.
When you decided to purchase with us, you are bound to agree the following:
In the case of out of stock item, and you already make your payment via netpay gateway, we will replace another same function product item to you if we deem necessary. Otherwise, we will notify you and refund back the amount of shortage item to you.