XTool IOBD2 OBD2 EOBD Car Vehicle Diagnostic

XTool IOBD2 OBD2 EOBD Car Doctor Vehicle
Diagnostic Tool Communicates with IPhone Smart
Phones

IOBD2 is an app for your car. It turns your
iPhone/iPod into an advanced display for your
engine data.
Now you do not need to drive on with the MIL light
on.
Now you do not need to wait to go to the garage
with your car to know what is wrong.
Now you can prepare the garage staff in advance by
knowing what is wrong with your car.
Now you can see what is wrong with your car on
your holiday so that you know if you can drive on.
Now you can know what your fuel consumption,
torque, or acceleration is, in real time.
Now ever wished you had your own customizable
gauges, showing only the data you were interested
in.

Performance gauges:
- Engine speed
- Corrected vehicle speed
- Open/closed loop
- Boost/vacuum combo gauge
- Acceleration and braking

Diagnostic
The Diagnostic function includes:
Read DTC
Read the current DTC that engine has stored, and
DTC info.
Clear DTC
Clear all the current DTC.
Live data
Read all the running parameters that related to
the ECU.
Freeze frame data
OBD system will record the system running
parameters related to the malfunction the moment
when it occurred at the same time when it set the
DTC. And this group of data is called freeze frame
data.
Readiness test:
Readiness reflects the status that all the valid
diagnostic functions. The diagnostic functions are
referring to the important monitoring functions in
OBD system, e.g. sensor monitoring, sensor
heater monitoring, and EGR system monitoring, etc.
These diagnostic functions are closely related to
the engine emission control.
Read vehicle info
Read vehicle info such as Vehicle Identification
Number VIN, Calibration IDs CALID and Calibration
Verification Number CVN
Sensor test
This service is to allow access to the on-board
oxygen sensor monitoring test results. The same
information may be obtained by the use of [Mode 6
test].
Mode 6 test
This service is to allow access to the results for
on-board diagnostic monitoring tests of specific
components/systems that are not continuously
monitored. Examples are catalyst monitoring and
the evaporative system monitoring.
EVAP System Test
The purpose of this service is to enable the
external test equipment to control the operation
of an on-board system, test or component.


My dashboard
The My dashboard function includes:
Idle mode engine rotational speed ,water
temperature,battery voltage,Air-intake
temperature,Instant fuel consumption
static,average fuel consuption ,Ever wished you
had your own customizable gauges, showing only the
data you were interested in
Cruise mode vehicle speed, The current engine
load, water temperature, Vehicle travel time,
vehicle travel average speed, Continuous running
mileage, instant fuel consumption dynamic,Ever
wished you had your own customizable gauges,
showing only the data you were interested in.
Sport mode: engine rotational speed, vehicle
speed, water temperature


Performance test
The Performance testfunction includes:
Accelerate/Decelerate test: Test acceleration
deceleration process time and distance
0 to 400m acceleration test: test spend time from
0 to 400 meters.

Diagnostic software updating
Users can find out the latest software release
info, downloading and installing procedures info
by logging on to app store.

History
Record DTC, live data, freeze frame data,my
dashboard data. And you can share the record what
you get from the car by IOBD2 on Twitter and
Fccebook.

Emissions Testing:
- Read and clear diagnostic trouble codes
- IM Readiness status

Components
The hardware includes: iOBD2 unit
The software includes: iOBD2 client software,you
can source iobd2 software and download it from
apple store